>
X

我的購物籃

商品 規格 數量 單價 小計 刪除
無資料
九洲國際開發有限公司 | 代理產品

  • 1

  • 2

代理產品 > PKS > PKS > PKS
PKS
PKS
商品詳細資訊

Palm Kernel Shell (PKS)

 

Palm Kernel Shell (PKS) are the shell fractions left after the crushing and expelling of palm kernel oil of the palm tree. The outer fruit known as the Mesocarp Fiber, is removed and extracted to produce palm oil leaving the nut which consists of a kernel surrounded by a woody shell also known as Palm Kernel Shell.

PKSの仕様 :

低品位発熱量  3,650kcal/kg以上
湿度      17〜19%以下
灰分      3%以下
硫黄      1,000ppm以下
窒素      4,400ppm以下
塩素      900ppm以下
ナトリウム+カリウム 2,500ppm以下
異物混入率    0.5%以下
最大粒形     30mm×30mm×30mm未満
嵩密度      600-700kg/M3以上
灰の初期軟化点  1,050℃超

1) Total Moisture (As Received Basis) (ARB) - Max 20% 17〜19%
2) Net Calorific Values (As received basis) (ARB) Min 3650/kcal/kgs
3) impurities Max 1% or less
4) Ash content Max3% or less
5) Sulfur 1% or less
6) Nitrogen 4.4% or less
7) Chlorine 0.9% or less
8) Sodium 2.5% or less
9) potassium 2.5% or less
10) size less than 30mm x 30mm x 30mm
11) Bulk density 600-700kg / M3 or more


Product Description:
Palm Kernel Shell is one of the top emerging biomass fuels consumed globally.

From its raw and unprocessed form, Palm Kernel Shells needs to be processed in order to reduce the high amount of contaminants such as impurities, bacteria, insects and moisture content. The processed PKS have a higher calorific value and a longer shelf life, which optimizes combustion efficiency.
PROCESS FLOW CHART - QUALITY CONTROL

Step 1 : RAW MATERIAL PROCUREMENT FROM PALM OIL MILLS–
to carry out quality inspections on the PKS. We will also ensure that the PKS stock is not stored in locations where it can be easily contaminated with foreign materials

Step 2: QUALITY CHECK UPON RECEIVING at OUR APPOINTED AGENTS’ STOCKPILE ACROSS INDONESIA-
as the quality of the PKS can differ at each Mill plant. When accepting deliveries of the PKS, our appointed agents’ experienced staff will inspect for foreign materials contamination and check the moisture content. Dry/wet mixing ratios are also recorded for each incoming truck

Step 3: PROCESSING AT OUR APPOINTWED AGENT”S WAREHOUSE ACROSS INDONESIA-
thorough Removal of Foreign Materials using screening machines and magnetic separators

Step 4: STORAGE –
all our screened & cleaned PKS are stored at our appointed agent’s indoor stockpiles across Indonesia to better managed control of the Moisture content and impurities

Step 5 : TRANSPORTATION – VIA BARGE OR DRY BULK CARRIER –
barge or Mother Vessel are loaded using a bucket system or conveyor depending on the facilities at each loading port

Step 6 : To Destination –
biomass power plant Generation